ECUA90/120/150/180/240 Air Conditioners

Industrial Climate Engineering

ECUA120

ECUA120

ECUA180 SS rt Silo

ECUA180 with Stainless Steel Cabinet

ECUA90/120/150/180/240 & ECUDA180/240/300 Air Conditioners

Industrial Climate Engineering’s air conditioners are used primarily to cool electronic and mechanical equipment shelters (E-Houses). Due to the high internal heat load, these shelters require cooling even when outside temperatures are 60°F (15°C) and below. The ICE air conditioners have the necessary controls and components for operation during these temperatures. All models use the non-ozone depleting R-410A refrigerant.

The ICE air conditioners are installed on the exterior of the building – no interior space is required. Two openings in the wall allow for the conditioned (supply) air to be discharged into the building and for the indoor air to return to the air conditioner.

A sealed condenser fan motor permits operation in hot, dusty environments. The saw tooth fan blade delivers both excellent efficiency and extremely quiet operation.

The direct drive backward inclined motorized impellor evaporator motor provides high aerodynamic efficiency in a compact design. The optimized blade geometry provides excellent air flow at a minimum of sound. Direct drive eliminates all belts and pulleys. A scroll compressor with R-410A refrigerant ensures years of dependable service even in the harshest of operating conditions. When outside air is required to provide pressurization, optional fresh air dampers can be field installed in openings in both the left and right side panels. When no outside air is desired, these openings are covered with blank-off panels.

The ECUA90/120/150/180/240, & ECUDA180/240/300 air conditioners have rated cooling capacities of 90,000, 125,000, 150,000, 170,000, 230,000, & 300,000 BTUH. The units are designed for operation over a wide range of ambient temperatures from 0°F to 131°F (-18°C to 55°C). Standard features include:

  • A phase monitor to continuously measure the voltage of each of the 3 phases and will shut the unit off if there is unbalanced voltage, high or low voltage, phase loss or phase reversal.When the problem is corrected, the monitor automatically resets.
  • High and low refrigerant pressure switches with a lockout relay protect the compressor and can be used for remote alarm or notification.
  • Hinged front door that opens to the left or right and facilitates access to the control box and filter on the ECUA90/120 & 150. On the ECUA & ECUDA180/240/300 models, double doors provide easy access to the condenser and evaporator compartments.
  • A refrigerant sight glass to indicate correct refrigerant charge and, if ever required, facilitates field charging of the unit.
  • Internal motor overloads on the evaporator and condenser motors and the compressor.
  • LEDs to show operational status.
  • Hot Gas Bypass for low temperature conditions
  • A Thermal Expansion Valve to improve efficiency and capacity at very low and high ambient temperatures

A full range of options and accessories are available, including fresh air dampers for positive pressurization, corrosion protection packages and dual compressors. To download the product data sheet on the ECUA90/120/150/180/240, & ECUDA180/240/300 please click on the link below.



After Hours Warranty Service

Call 1-800-841-7854 ext. 123. Leave a voice mail message with the following information:
  1. Your name
  2. Your phone number and extension
  3. Model number of the ICE unit that requires service
  4. Serial number of the ICE unit that requires service
Your call will be returned promptly.

Contact ICE

Address:

Industrial Climate Engineering
P.O. Box 5104
2002 Hoover St
Cordele, GA 31015

Phone:

(229) 273-9558

Fax:

(229) 273-5154
   

Email:

 
   

For After Hours Emergency Assistance:

888-726-2734

After Hours Warranty Service:

1-800-841-7854 ext. 123.
To place orders, check lead time, or follow up on order status, please call or e-mail